News Digest…May 2025

May started with the Victory in Europe celebrations to mark the end of the European phase of World War Two. But the celebrations were deeply overshadowed by the very real fear of another European-wide war thanks to Russia’s attack on Ukraine combined with Trump having rendered NATO no longer fit for purpose. 

Indeed, the whole month has been defined by war of one sort or another. Most nations continue to be roiled by the international trade war that the American president Donald Trump has started. At the same time, Trump’s clumsy efforts at peace appear to have worsened several actual wars from Gaza to Ukraine. 

May has also seen some European nations break decisively from the US position on foreign affairs. Up to now, most G7 nations have taken their cue from the Americans. But Britain, France and Canada have lost patience with Israel and demanded an end to the blockade around humanitarian aid in Gaza. The EU has also said that it is reviewing its position on trade with Israel. This follows European nations extending sanctions on Russia and demanding ceasefire talks for the war in Ukraine while the Americans continue to dither. 

But at last there is hope that an American leader can bring about some kind of stability. Pope Leo 14th, the former cardinal Robert Prevost from Chicago, USA, has called for ceasefires in all the world’s conflicts, and has already met the Ukrainian president, even suggesting the Vatican could host talks to broker a ceasefire. He’s even survived a meeting with the US vice president, JD Vance.

Naturally, Trump has continued to sow chaos in the financial markets around the world with his constantly changing tariff policy. The Financial Times has coined the acronym TACO, or Trump Always Chickens Out, to describe how the markets rise and fall on the various tariff announcements. Apart from helping to promote Mexican food, this also suggests that most governments are unlikely to be swayed much by the tariff threat. However, there is plenty of evidence that the tariffs are hitting US imports. They certainly seem to be affecting the financial results and planning for many of the biggest suppliers to the print industry, as American customers follow the TACO logic and delay purchases.

Trump has even attacked Harvard, one of the most prestigious universities in the US, which has so far refused to bend to his will despite losing millions of dollars in federal funding. In contrast, the EU has established a €500 million fund, catchily named ‘Choose Europe for Science’ to attract more overseas academics and has announced plans to fast track visas for US researchers. 

Britain and the EU have tidied up some of the most vexatious elements of the Brexit deal amid a growing realisation in both the UK and the EU of the need to unite against the bigger problems, namely the international trade war and our common defence needs. There has even been enough confidence in the economy for the Bank of England to cut its base rate to 4.25 percent, which has taken some pressure off consumers with mortgages and some business borrowing.

However, inflation has also risen to 3.5 percent, while government borrowing has reached £20.2 billion, an extra £1 billion up on last April, giving the chancellor, Rachel Reeves, another headache. This makes additional tax rises almost inevitable, despite Reeves’ rather foolish earlier promise that there would be no further tax rises. 

There is some sign of alarm within the government at Labour’s falling support. Voters simply don’t understand why a Labour government is cutting their benefits and pushing up their taxes instead of raiding the finances of more wealthy people and addressing the massive wealth imbalance in the UK where, according to the Sunday Times Rich List, the 50 wealthiest families in the UK now own more than the poorest 50 percent of the population combined. Starmer’s hope that he could use economic growth to cover up that wealth imbalance looks increasingly unrealistic. 

Then again, the ambitions of politicians the world over are rarely in touch with reality, which is why it’s so important to study the ebb and flow of geopolitics over the months. You can find a longer analysis of these trends for May filed under Notes from the Gallery.

Mark Lewiecki, senior product manager at Adobe.

Other notable stories affecting the print industry from this month include Adobe announcing v7 of its PDF Print Engine, plus new wide format presses from Fujifilm and Agfa, as well as new printhead variants from Epson.

The American graphic arts association, Printing United Alliance, has issued a new standardised classification system. The Printing United Taxonomy aims gives industry suppliers a consistent nomenclature to describe companies, equipment and services. This is an update to the existing 2021 taxonomy and has been put together with help from  IT Strategies and consultants Zwang & Co. It can be downloaded free of charge from printing.org.

Dave Leskusky, president of Printing United Alliance, explained: “By adopting a common language for our products and services, suppliers everywhere can improve their data accuracy, enhance market insights, and drive more informed business decisions.”

Xerox issued its financial results for the first quarter ending 31 March, which highlighted a number of issues. Total revenues fell 3 percent from $1502 million to $1457 million. However, while sales actually rose from $523 million to $557 million, the recurring income from services, maintenance rentals and so on fell from $979 million to $900 million. Within this, the Print segment saw its profits fall from $58 million to $41 million, while the IT Solutions division went from a loss of $1 million to a profit of $5 million year on year. 

Xerox has managed to cut its Research, Development and Engineering expenses, from $49 million to $42 million, and its Selling, Administrative and General costs from $397 million to $378 million. But other expenses have ballooned from $44 million to $68 million. Nonetheless, the net result improved from a loss of $150 million to a loss of $90 million.

Leibinger, which makes coding and marking printers, has signed a strategic collaboration with Rotech Machines, which offers coding solutions, to strengthen its presence in the UK market. According to Leibinger, the UK market has high expectations in terms of flexibility, reliability, and expert consultation as well as specific UK regulations such as UKCA marking. The UK Conformity Assessed marking indicates compliance with UK standards and replaces the European CE standards mark following Brexit.

From left: Richard Pether of Rotech and Tim Richards of Leibinger.

Richard Pether, general manager at Rotech, noted: “Over the years, we’ve offered various technologies, from hot foil to thermal transfer and thermal inkjet, each with unique features and benefits. The Leibinger range of continuous inkjet printers is a welcome addition to our range and has been well received by our customers, across many applications.” This will include Leibinger’s IQjet, which promises up to five years of service-free operation.

Esko has worked with CarbonQuota to introduce a new tool to enable brands and packaging converters to calculate carbon emissions. It’s available through Esko’s S2 platform and connects with CarbonQuota’s calculation engine to provide carbon footprint data at the design stage, during product development, and in production. This approach allows companies to evaluate environmental impact throughout the entire packaging lifecycle.

Geert De Proost, director of Product Partnerships at Esko, commented: “As climate change concerns intensify, consumers are becoming increasingly environmentally conscious and exerting pressure on companies to adopt less impactful practices, while increasing regulations are applying pressure on brands to take more responsibility for their broader environmental impact.”

Installations

CPI Books, one of Europe’s largest book manufacturers, has installed a Kurz DM-Maxliner 3D in the UK as part of its standard production for industrial book printing. This device enables digital metallization, plus UV spot and relief varnishes to be applied in a single pass, which can be used to create high-quality book covers and creative special editions.

Jamie Stanborough, operations director at CPI Books, explained: “The DM-Maxliner 3D stands out in terms of quality, productivity and robustness. It quickly became clear to us that no other solution meets our high book embellishment standards as well as this one. An additional advantage for us is that Kurz not only supplies the machine but also manufactures the transfer carriers for embellishment. This gives us a perfectly coordinated complete solution that optimally integrates all process steps, from the machine to the embellishment material.”

From left: Matt Hodgson, sales manager for Kurz UK, with Jamie Stanborough, operations director of CPI Books.

KennedySmith Press Ltd, a folding carton producer based in the west of Scotland, has installed its first digital press, opting for a Xeikon CX500 to run alongside its B1 litho printing equipment. The company was founded in 1997 to provide for the packaging and printing requirements of Bioforce, a European market leader in herbal remedies. In 2005 the business relocated to a new purpose-built factory and invested in a new litho printing equipment, upgraded die-cutting equipment, and a new production management system. The company has invested heavily in both its quality and environmental systems to meet the needs of pharmaceutical and food customers. It claims to be the largest independent solid board carton printer in Scotland, supplying many of the large high street retailers.

Michiel Molenaar, Director of KennedySmith, explained: “An analysis of our productivity has highlighted the amount of smaller format jobs that we were printing multi-up on our B1 litho presses. They were taking longer to make-ready than to actually print, meaning that they were less profitable than we would like. We decided that this could be the ideal time to take a serious look at digital – the process typically offers virtually zero make-ready, though on a smaller format substrate.”

The Xeikon install includes a coating unit and a reel sheeter. Molenaar adds: “Our shorter runs on the Xeikon are usually about 2,500 cut sheets, but we also handle longer runs that equate to 15,000 sheets once we have cut the work from the continuous feed.”

Appointments

The Plockmatic Group has appointed Ed Hudson as General Manager of its UK Sales and Service operation, following the retirement of Ray Hillhouse, the former VP of Sales and Marketing Offline. Hudson began his career with Xerox in the mid ‘90s followed by a 17-year spell with Océ and Canon. He has worked in environmental consultancy and the power quality business as well as IBIS Integrated Binding Systems. 

Ed Hudson has taken on the role of General Manager for Plockmatic’s UK Sales and Service operation.

Plockmatic UK is in the process of consolidating the Morgana and Intec brands. Hudson commented: “Our UK client base is currently facing increasing challenges with higher employment costs, supply chain uncertainty and, in some cases, the fallout from US tariffs. We look to further understand our clients’ requirements and offer the best technical and most cost-effective solution in every case, helping them to find the right solution for their business, whether that’s an inline or offline product.”

Additive Manufacturing UK, the trade association for 3D printing in Britain, has named Craig Pyser as its new chair. Established in 2014, AMUK aims to establish the UK as a world leader in the development and adoption of additive and 3D printing technology. Pyser is the CEO of AMufacture, a private equity-backed contract manufacturer specialising in industrial 3D printing and additive manufacturing.

His predecessor, Stewart Lane, who oversaw AMUK becoming part of the Manufacturing Technologies Association (MTA) cluster, commented: “Craig’s expertise and experience make him the ideal candidate. I urge all AMUK members to join me in thanking Craig and wishing him the best in his new position.”

Domino has taken on Michael Strehlow as its new account manager for Corrugated for the EMEA market. He will work closely with packaging manufacturers to explore the opportunities offered by digital printing technology, enabling converters to do more for their brand customers with Domino digital printing solutions. Strehlow has three decades of experience in the printing and packaging industry at globally recognised companies such as Heidelberger Druckmaschinen, Esko/Kongsberg, and Konica Minolta,

David Ellen, Divisional Director of digital print Business at Domino, commented: “We are excited to have Michael on board and trust his expertise will be an asset for corrugated converters embarking on their digital printing journey.”

Sadly, Lascelle ‘Las’ Barrow, who was an Honorary Board Member and past president of Fespa, has died after a prolonged illness at the age of 79. Following his technical training at the London College of Printing, he went on to found Augustus Martin at age 19 with his business partner Barrie Dix. At Fespa, he was instrumental in the decision to bring the organisation of exhibitions in-house in the late 90s. He was also a driving force behind the global expansion of the Fespa event brand, proposing the launch of Fespa Mexico and championing a Fespa presence in other emerging markets such as Brazil.

Neil Felton, CEO of Fespa, comments: “With Las’s passing, we say ‘farewell’ to someone who has been the beating heart of Fespa. He had a razor-sharp mind and an unshakeable focus on steering us forward – motivated by his passion for print, his desire to help print entrepreneurs like himself, and his confidence in the transformative potential of technology.”


Posted

in

, , , ,

by

Syndicate content

You can license the articles from Printing and Manufacturing Journal to reproduce in other publications. I generally charge around £150 per article but I’m open to discussing this for each title, particularly for publishers that want to use multiple stories. I can provide high res versions of images for print publications.

I’m used to working with overseas publishers and am registered for VAT with the UK’s HMRC tax authority but obviously won’t charge VAT to companies outside the UK. You can find further details and a licensing form from this page, or just contact me directly here.

Support this site

If you find the stories here useful then please consider making a donation to help fund Printing and Manufacturing Journal, either as a one-off or a repeat payment. Journalism is only really useful if it’s truly independent and this is the only such news source serving the print/ manufacturing sectors.

However, there are costs involved in travelling to cover events, as well as maintaining this site, not to mention the time that it takes to carry out research, check facts and interview people. So if you value this work, then please help to maintain it and keep it free to read.

Subscribe

Never miss a story – subscribe to Printing and Manufacturing Journal to receive an email notification every time an article is published here. It’s completely free of charge and you can cancel the subscription at any point without any hassle. There’s no need to provide any information other than an email address and subscribers details are not for sale so there’s no risk of any further marketing spam.

Related stories

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *