Kyocera has announced a new air-cooled, UV LED light source, the G7A Series, which it claims is among the smallest and most efficient in its class.
These LED lamps are designed for applications such as ink, resin curing and adhesion. Kyocera claims that it achieves the highest irradiance amongst air-cooled LED lamps for these applications. They’re built on Kyocera’s core competence in ceramics, using a proprietary ceramic substrate with heat-dissipation. They also include a heat sink to improve energy efficiency while still delivering an irradiance of 20W/cm² at 0mm irradiance distance.
The G7A series are smaller than Kyocera’s existing G5-series. They weigh 1kg and measure just 120 x 151mm with a depth of 52mm, compared with the 140mm depth of the G5H units. This should make it considerably easier to fit these units into a production system, especially for inter-colour pining where it might be desirable to keep the colour print bars close together. It also means that OEMs won’t have to choose between size and performance in the future.
The G7A series is made up of three models so far. The base unit works at 365nm and delivers a 300mJ/cm2 dose at 50mpm. The other two models have wavelengths of 385nm and 395nm and both give out 400mJ/cm2 at 50mpm. Kyocera claims that this allows for the level of high speed curing that normally requires water-cooled UV LED light sources, which are more complex and expensive, use more energy and take up more space.
The units have a 30mm irradiance depth and a working width of 120mm but multiple units can be used side by side to give a total irradiance width of 2.4m. It’s possible to fine tune the LED irradiance width in increments of around 30mm, meaning that the level of curing could be altered across the print width to suit different uses.
All the units include a serial communication bus for external connections so that various metrics can be recorded, including the LED temperature, LED current, fan operation time, and accumulated LED lighting hours. This can help detect lighting and system errors, and generate notifications to replace filters and when the unit is approaching its end of life.
The G7A Series will be available in June 2025. You can find further details on the current range at global.kyocera.com, which should be updated when the new units are available.


Leave a Reply