News Digest…October 2025

October has felt a lot like Groundhog Day combined with Halloween, where every day is full of witches and trolls and ends with anything resembling hope turning into a pumpkin, only to be followed by the exact same day all over again. 

An uneasy and very fragile peace has broken out in Gaza, a rare bit of good news. The Israeli hostages have been returned and most of the fighting and bombing has stopped, though there is still much uncertainty about what comes next. Naturally the American president Donald Trump has claimed credit for this as part of his ongoing campaign for a Nobel peace prize, but it’s hard to be a peacemaker when you’ve armed and aided one of the combatants and generally helped prolong the war. Trump has also matched Russia’s dangerous posturing with nuclear weapons, announcing a new round of nuclear weapons tests.

In the end the Nobel committee gave the peace prize to the Venezuelan opposition leader María Corina Machado along with a carefully crafted speech criticising those who want to be dictators that mainly seemed to outline the reasons why they wouldn’t even consider giving it to Trump. 

Meanwhile, Trump has issued another round of tariffs. Or maybe it’s just the same tariffs again. But this time he really means it. Or not. He cancelled trade talks with Canada and then raised the tariffs on Canadian goods entering the US by 10 percent, in response to an advert run by a Canadian state politician who is not part of the Canadian government. So much for free speech. Trump can call other leaders names, criticise their policies and stir trouble in their countries, but can’t take any criticism back. If an Australian journalist asks a legitimate question of him, or a Canadian state politician questions his policy then those entire countries are made to suffer. This is playground bullying and if we in the West can’t stand up to it then we are not living free and nor do we deserve to.

China played Trump at his own game by imposing new export controls on the rare earth minerals that the West so desperately needs for manufacturing. Trump replied with his trademark diplomatic skills, promising a “massive increase of tariffs on Chinese products” but then embarked on a tour of Asia to sign a flurry of deals aimed at improving America’s access to those rare earth minerals. Actually these minerals aren’t that rare with deposits in many countries. But the Chinese are decades ahead of everyone else in processing these minerals.

The UK’s relationship with China has come under the spotlight thanks to the collapse of a court case against two British researchers accused of spying for China. The case fell apart ostensibly because both this Labour government and the previous Conservative administration refused to classify China as a national threat, mainly because they both saw enormous economic opportunities in China. And the reality is that Britain and other countries have been pushed into greater reliance on China by Trump’s erratic trade war. Matthew Collins, the UK’s deputy national security adviser, stated that China was carrying out “large scale espionage” against the UK and was “the biggest state-based threat to the country’s economic security”.

Naturally Collins failed to take into account the efforts by the British chancellor Rachel Reeves. UK government borrowing in September hit its highest level in five years, at £20.2bn, up £1.6bn from the same month last year according to the Office for National Statistics. Borrowing over the first six months of the financial year has now reached £99.8bn. A rise in repayments on the interest of this debt wiped out the additional money that Reeves raised through tax. Consequently most analysts assume that she will have to raise taxes further. This fear, coupled with the long wait for the budget, is causing a lack of confidence and further damaging economic growth.

Andrew Bailey, the governor of the Bank of England, has warned that the collapse of two US companies – car parts supplier First Brands and subprime car lender Tricolor – could be a sign of a wider financial crisis in the US along the line of the 2008 crash. Both companies were involved in the private credit market with loans from non-bank lenders. Sarah Breeden, the Bank’s deputy governor for financial stability, told the the House of Lords’ financial services regulation committee that the Bank would be examining the private finance sector, adding: “We can see parallels with the global financial crisis.”

Zack Polanski, the leader of the Green Party, outlined the policies that most Labour voters would like to see. He told his party’s conference that taxing the assets of the richest 1 percent would deal with the cost of living problems that are holding back the country as a whole, adding: “You cannot be an effective environmentalist without talking about the deep inequality in our society.”

Actually, Frank Pennisi, CEO of EFI, made a similar statement last year at EFI’s Drupa press conference when he reaffirmed EFI’s commitment to sustainability, adding that he considered human rights issues to be part of any policies designed to protect the environment. In any case, you can find a longer analysis of the geopolitical events from October under Notes from the Gallery.

Of the stories that I’ve covered this month, by far the most popular has been the various installations of Fujifilm’s FP790 flexible film inkjet press, three of which have been successfully installed, plus another with a less happy outcome. This has been closely followed by Canon’s announcement of its CorrPress iB17 corrugated inkjet press. It’s perhaps not surprising that packing print would be a hot topic for most readers.

Ronen Samuel, CEO of Kornit shows off the company’s new footwear solutions.

October also saw the ITMA textile show take place in Singapore. I’ve already covered some of the announcements, from Kornit and ColorJet, and will write about the remaining print-related news later this week. The other big show from October was Printing United in the US, which also generated some news. This includes Fiery previewing its XF9 RIP, JobFlow Pro workflow automation software and FreeForm Create 2.0 variable data tool. These were all announced earlier this year, and each picked up a Pinnacle Award from the Printing United Alliance.

Scodix used the show to introduce another embellishment application for its portfolio, Luxe, which can be applied to high-end materials including leather, linen, silk, natural organic materials, and canvas. This is aimed at luxury packaging, publishing, books and diaries. Eli Grinberg, CEO of Scodix, noted: “By validating and supporting these luxurious, speciality substrates, our 17th application unlocks endless possibilities and new creative opportunities for designers, printers and publishers. Scodix Luxe empowers our customers to enter new high-value segments and create products with unprecedented tactile and visual richness, ultimately helping them deliver more captivating and profitable work.”

Scodix has added a 17th application – Luxe – to its embellishment machines.

Elsewhere, Adobe has rejoined the Ghent WorkGroup, which is a neat symmetry for all involved, since Adobe developed the PDF concept and GWG develops best practices around the PDF/X standards for the print industry. Dave Zwang, consulting analyst and Chair of the GWG, noted: “Few vendors are so key to our industry as Adobe, and we’re incredibly pleased to see them return to the Ghent Workgroup.”

Mike Scrutton, Adobe’s Director of Print Technology and Strategy, added: “Rejoining the Ghent Workgroup reflects our commitment to advancing industry standards, especially in areas like embellishment and textile. We’re proud to collaborate with a group whose objectives closely align with our vision for the future of print.”

Kyocera Europe has begun a collaboration with the iPrint Institute and Competence Center, which is a public research institute specializing in inkjet technology based in Fribourg, Switzerland. Kyocera will establish a dedicated space within iPrint and utilize the latest equipment and technologies to evaluate special inks and materials that have traditionally been difficult to handle, with the aim of developing new applications, such as 3D printing, coating, and printed electronics. Kyocera’s printheads are used in many different industries, while iPrint attracts engineers and companies from around the world and offers cutting-edge R&D programs.

Epson has completed the construction of a new factory – Building 6 – at its Tohoku plant in Japan that quadruples its future printhead production capacity. Epson says that it expects increased demand in the office, home, commercial and industrial markets. The new building is adjacent to the existing printhead production facility and is designed to enable more efficient operations, from component processing to assembly. In addition, the new process design aims to reduce labour and save space, minimizing in-process inventory and introducing automated transport robots and efficient layouts to reduce the workload on operators.

An energy-efficient stratified air-handling system has also been installed to reduce both energy consumption and costs. The new factory, which has a total floor space of 11,191 sqm split cross two floors, represents a total investment of 5.1-billion yen, roughly $33.73 million. It should be ready to start operations in May 2026. It’s worth noting that Epson has a similar factory at Akita, which was expanded with a new building in 2023. 

The British ink manufacturer Mexar has signed a deal whereby Print Equipment GmbH of Germany will distribute its Ultra Pro DTF ink throughout Germany, Austria and Switzerland. Print Equipment will also include Mexar inks as standard with its new 300mm wide XP300 Pro DTF Desktop Roll Printer. Mexar’s Ultra Pro DTF inks are water-based, non-hazardous and formulated without harmful glycols. They offer vivid colour, smooth printability and dependable wash durability. The full set includes Cyan, Magenta, Yellow, Black, Red, Orange, Green and Blue, plus white.

Mario Panter, Managing Director of Print Equipment GmbH, commented: “Our customers expect the highest print quality and dependable performance from their DTF systems,” adding “Mexar’s Ultra Pro DTF inks meet those expectations perfectly – combining colour brilliance with proven safety and reliability.”

From left: Maxen Liu, General Manager Sales and Marketing, Zhang Zishen, Vice President, and Li Li, President and Managing Director, all from MK Masterwork, as well as Jürgen Otto, CEO, Dr. David Schmedding, CSO, and Xue Yang, Global Head of Postpress Packaging, all from Heidelberg.

Heidelberg has celebrated the tenth anniversary of its partnership with the Chinese manufacturer MK Masterwork, which specialises in post-press equipment. This has resulted in Heidelberg installing around 1,500 systems, including high-performance die-cutters as well as folding carton gluers and hot-foil stamping machines, produced by MK Masterwork, at customer sites around the world.

The two companies signed an agreement to extend and expand their cooperation in the field of integrated and highly automated complete solutions, which can also be developed in collaboration with customers. This also includes the integration of MK Masterwork’s robotics systems, which are becoming increasingly important for packaging manufacturers, particularly for intralogistics.

Installations

Snuggle, which is based in Peterborough in the UK, has invested in a Kornit Atlas Max Plus DtG printer. The company already operates an Atlas Max Poly DtG printer for polyester garments and a Titan dryer.  

Akil Thathia, director and founder at Snuggle, commented: “We were the first Atlas Max customer in the UK when it was unveiled over five years ago, and have always been delighted with its ability to deliver consistent quality and an economical cost per print to ensure profitability in any quantity.” Thathia continued: “A key element of our business growth is directly tied to the power of Kornit technology – which is why we have invested so heavily in their advanced direct-to-garment systems over the years. Our partnership with Kornit is strategic to our continued planned growth and success.”

From left: ​Jordi Giralt, Global Sales Director PL Label Bobst; ​Sean Cockerell, UK Operations Lead MCC; Chris Gannon, Vice President of Operations, MCC EMENA; Anca Rascutoi, Director of Capital Investments and Digital Transformation MCC EMEA; Goedicke Frank, Global Account Manager PL Label Bobst.

The multi-national label converter MCC, which has its headquarters in the US, has invested in two Bobst Master M6 inline flexo presses to enhance its production capabilities across the EMEA region. These presses combine DigiFlexo automation, the oneECG colour process, and advanced job-change capabilities.

Chris Gannon, MCC’s Vice President of Operations for EMENA, commented: “Investing in two Bobst Master M6 inline flexo presses is a strategic step in MCC’s long-term growth plan. Our decision reflects a clear commitment to strengthening our production capabilities and meeting the evolving needs of our customers across the EMEA region. Bobst has been a trusted partner for many years, and their consistent innovation, technical expertise and responsive service make this choice a natural extension of our existing relationship

Appointments

Fujifilm Integrated Inkjet Solutions has appointed Ankur Mour as Vice President and General Manager. Mour is a Fujifilm veteran, serving in progressively senior roles for numerous functions, including engineering, manufacturing operations, commercial presales, customer support, ink development, and project management. He has directed and managed the group’s long-term strategic vision, operational plans, and processes. He played a pivotal role in the development and launch of recent products such as the 42X Printbar System, DE1024 Embellishment System and the Dimatix Materials Printer DMP-2850 S.

Ankur Mour, Vice President and General Manager for Fujifilm Integrated Inkjet Solutions.

Ricoh’s Graphic Communications division has created a new European marketing director role for the EMEA region, and filled it by appointing Evelyn Truter. She has spent 26 years in the production printing business, starting in production printing sales after which she held multiple senior international marketing roles. Eef de Ridder Vice President, Graphic Communications Group, Ricoh Europe, commented: “We are delighted to welcome Evelyn into this new role created to capitalise on exciting growth within Ricoh Europe.” He added: “She brings with her tremendous experience from both inside and outside the print production industry that will accelerate the opportunities arising from a successful drupa and Ricoh Europe’s strong performance over the last financial year.”

Soyang Europe has taken on two new members of its sales team. Lauren James has taken on the role of Internal Sales Manager, having worked in recruitment for the past 11 years. She now handles customer relationship management, and both team and sales management.

Louise Bibby joined as Sales Administrator, working with Soyang customers across the UK, supporting them with their product choice and helping them to locate the most effective solution for each project they are working on.

Upcoming events

There are two events in Japan of note for November. First, there is Advances in Print Technology from the Society for Imaging Science and Technology at the end of this week. This will be swiftly followed by this year’s Japan Inkjet Technology Forum. I will be at both of these and am looking forward to meeting many readers there, both Japanese and international.


Posted

in

, , , ,

by

Tags:

Syndicate content

You can license the articles from Printing and Manufacturing Journal to reproduce in other publications. I generally charge around £150 per article but I’m open to discussing this for each title, particularly for publishers that want to use multiple stories. I can provide high res versions of images for print publications.

I’m used to working with overseas publishers and am registered for VAT with the UK’s HMRC tax authority but obviously won’t charge VAT to companies outside the UK. You can find further details and a licensing form from this page, or just contact me directly here.

Support this site

If you find the stories here useful then please consider making a donation to help fund Printing and Manufacturing Journal, either as a one-off or a repeat payment. Journalism is only really useful if it’s truly independent and this is the only such news source serving the print/ manufacturing sectors.

However, there are costs involved in travelling to cover events, as well as maintaining this site, not to mention the time that it takes to carry out research, check facts and interview people. So if you value this work, then please help to maintain it and keep it free to read.

Subscribe

Never miss a story – subscribe to Printing and Manufacturing Journal to receive an email notification every time an article is published here. It’s completely free of charge and you can cancel the subscription at any point without any hassle. There’s no need to provide any information other than an email address and subscribers details are not for sale so there’s no risk of any further marketing spam.

Related stories

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *