News Digest…March 2025

March has been another month seen from the wrong side of the looking glass, free from any kind of logic. Instead we are all moving around the chess board at the whim of the Orange King.

Unsurprisingly, stock markets globally have fallen as Trump has threatened further tariffs against “all countries.” Business craves stability but the only constant now is change. The only logical answer is to shorten supply lines as much as possible to limit exposure to tariffs, but that will inevitably push up prices.

That said, there is still plenty of support for the Trump administration from within America. Jim Continenza, CEO of Kodak, has long argued about the need for tariffs, particularly to protect Kodak’s printing plate production, telling me recently: “All we want is a level playing field. But we need long term tariffs. Prices are not going up since the tariffs were put in place.”

And it is possible that this disruption will create more opportunities for digital manufacturing. Digital technologies, including printing and additive manufacturing, allow for more distributed manufacturing with short supply lines that are less affected by global economic headwinds and can reduce both logistics costs and carbon footprint. 

In the meantime, the latest figures for the British economy, showed that GDP shrunk in January by 0.1 percent, which apparently was a surprise to many economists though it should have been obvious to anyone paying attention. Manufacturing output fell by 1.1 percent, with construction also down and services up only 0.1 percent as consumers cut back on hospitality. Most businesses have frozen new hirings following the rise in employers national income from the last budget. 

Luckily, the British chancellor Rachel Reeves has responded to these concerns by continuing her one woman comedy revue around Parliament, with a new Spring statement slashing welfare costs. In theory this should make up for a £9.9 billion shortfall to the Autumn budget caused by higher than expected interest rates. That was before Trump’s latest round of tariffs. Reeves is now the only European finance minister not to realise that the scale of the threats facing her requires a fundamental reset in her approach.

The EU has agreed an €800 billion plan to allow its member states to borrow for their defence. European governments are also rewriting their fiscal rules – the degree of borrowing and the associated risks that they believe their economies can withstand – to allow for more defence spending. The incoming German Chancellor Friedrich Merz has already changed Germany’s debt rules and signalled a massive increase in borrowing.

Then there is the Mad Hatter’s tea party, also known as SignalGate, in which senior members of Trump’s inner team discussed military action in Yemen on the commercial app Signal, which is not secure enough for such conversations. Strangely, no members of the American military were included but the group did invite one journalist, meaning that we were all able to laugh along at their ineptitude. 

The conversation revealed the visceral hatred of Europe at the heart of the US government, and the huge gulf between European and US leaders. Plus, there was the ridiculous expectation that Egypt and European countries would pay for the cost of this bombing. Needless to say, there were no apologies or resignations over this security breach; instead the main participants mostly lied about the content and insulted the journalist involved, such are the values that now govern America.

Perhaps not surprisingly there is some evidence that the US is losing its brand appeal amongst tax payers outside of the US and particularly European consumers. This includes some Tesla cars being vandalised and reduced demand for flights to the US. Interested readers can find a longer analysis of the geopolitical trends from March on my other website here.

The Vulcan digital cutting and creasing machine will take Highcon into the 1.4 x 1.7m corrugated board market.

Highcon, which pioneered digital cutting and creasing machines, has run into serious cashflow difficulties, and has laid off most of its staff. Highcon has attributed this to “a combination of external and business factors” including $10 million worth of orders that have been postponed as well as ongoing uncertainty from the various conflicts in the region and the US trade war, which has caused potential customers to delay investment decisions. Highcon told the Tel Aviv stock exchange: “At this stage, it has been decided to keep twenty employees and consultants for continued operation of the company at a minimal level, in order to preserve its activity as a going concern.

Heidelberg has celebrated its 175th anniversary, having started originally in 1850 in Frankenthal as the Hemmer, Hamm & Co. bell foundry and machine shop. The first Heidelberg Tiegel automatic letterpress platen press was introduced in 1921, followed in 1962 by the company’s first offset press, which gave way in 1975 to the first Speedmaster. 

Jürgen Otto, CEO of Heidelberg, commented: “A company that can sustain its success over such a long period, become a world leader in its industry, and continue to shape the entire sector right up to the present day has strong credentials that are testament to its innovative capabilities. The defining feature of Heidelberg is the company’s understanding of markets, customers, and exceptional product quality.”

Jürgen Otto, CEO of Heidelberg.

Xsys has completed its acquisition of MacDermid Graphics Solutions from Element Solutions. The combined business will have a workforce of approximately 850 employees worldwide and turnover of approximately €370 million. Dr Alexander Unterschuetz, Group CEO of XSYS, commented: “This transaction creates significant value and opportunities as a result of the complementarity of both businesses’ product portfolio, services, and employees, thus making us a more complete solution provider for our customers.”

Porat Itay Holdings completed its acquisition of AVT (Advanced Vision Technology) and has now established the company as a separate independent business that is no longer integrated into Esko. However, co-owner and new CEO Roy Porat commented: “As part of the acquisition agreement, AVT retains its special partnership with both Esko and X-Rite, allowing AVT to continue to collaborate closely with other industry leaders and offer its unique capabilities of seamless workflow and unmatched colour measurement.”

Domino has added a new high-speed productivity mode for the N730i digital label press that takes it up to 90mpm from the standard 70mpm speed. This is achieved by reducing the resolution though Domino claims that there is no perceptible difference in print quality compared with the standard operating mode.

Michael Matthews, Global Product Manager for Domino, says that customers had asked for faster speeds, noting: “The high-speed productivity mode significantly enhances the speed and efficiency of the N730i press, allowing our customers to achieve up to a 28 percent increase in productivity.”

The inkjet print engine inside the Domino N730i label press.

Sun Chemical has introduced two new metallic effects pigments for the cosmetic industry. These are Chione Electric Scarlet SR90D, an intense red shimmering effect pigment, and Chione Electric Sienna SC90D, a bright copper shimmering effect pigment with enhanced chroma, are both created from patented technology and globally approved as colour additives for cosmetics, skin, body and sun care. These new pigments are non-staining, non-bleeding and offer UV stability, providing formulators with innovative solutions to meet the high demand for vegan, carmine-free products.

Xerox hosted a three day event for its worldwide partners as part of its efforts at reinventing itself. Xerox is transforming into a services-led, software-enabled organization while investing in transformative technologies and systems to fast-track partner success. It’s not clear what that means for the development of future hardware, but it was noticeable that Xerox did not participate in last year’s Drupa or this year’s Hunkeler Innovation Days. 

Announcing a Global Partner Program, Steve Bandrowczak, CEO of Xerox, said: “Our primary objective is to be the preferred partner for our partners, making sure they feel completely supported and empowered to exceed their clients’ expectations. This summit is a chance to celebrate our progress, share important updates, and discuss strategies to accelerate our collective vision and growth. It’s an opportunity to emphasize the investments we’re making to help our partners achieve their full potential.”

Neil Felton (centre) CEO of Fespa.

Fespa has set up a new foundation, which will operate as a sister organisation and continue Fespa’s commitment to encouraging sustainable practices. The Fespa Foundation will support community projects, starting with the Evane Intermediate School in KwaZulu-Natal, South Africa. 

The Foundation will also send samples printed during shows, including the upcoming Fespa Print Expo in Berlin in May, to support community projects, which will also reduce the waste from the show. To help with this, exhibitors will be encouraged to produce samples to specific uses such as educational posters, maps, student clothing and backpacks. Neil Felton, CEO of Fespa and founder of The Fespa Foundation explains: “Fespa is a global support organisation, and our mission has always revolved around supporting communities, educating and knowledge-sharing, and promoting sustainability.”

He added: “By creating the Foundation, we want to harness the combined strength of our global exhibitor and visitor base and demonstrate how, together, we can channel the power of print to drive positive change globally.”

Appointments

Flexo press manufacturer Comexi is planning changes to its senior management team from I May 2025. Pau Xifra, who is currently the managing director, will become president, taking over from his father Manel Xifra, who will remain as a member of the Board of Directors. At the same time, José Mª Pastor, who joined the company a year ago as the Strategy and Transformation Director, will take on the role of Managing Director.

This change has been long planned, as Manel Xifra explains: “Seventy years after the foundation of our company, we are in an exciting moment, experiencing moments of great change, and we believe that it is good that a new generation, with new ideas and ways of doing things, will take over the leadership of the organization in order to face these challenges and achieve even more ambitious goals.”

Jeremy Spencer, who previously worked for Global Graphics software, as well as Caldera and Fiery, has now joined Callas Software as OEM Director. He will focus on supporting existing OEM customers and on developing new OEM partnerships. Spencer commented: “The OEM customers for whom the Callas technology is an ideal fit, certainly overlaps with my expertise: areas such as industrial inkjet, ultra-high data rate environments, downstream data path technologies. There is a real need for robust and fast PDF technology there!”

Heidelberg has announced that its chief financial officer, Tania von der Goltz, has chosen not to renew her contract. This is entirely predictable since she was recruited by the company’s former CEO, Dr Ludwin Monz. Instead, the current CEO, Jürgen Otto will take over the management of the finance functions until further notice.

Ink manufacturer Siegwerk has promoted Christopher van Laack, from his role as Vice President of Paper & Board EMEA and Liquid Food Packaging to President of its Americas business and member of the Group Executive Committee. He will also assume responsibility for Global Technology, Product Safety & Responsibility, Siegwerk’s Circular Economy Hub, and Global Brand Owner Collaboration. This follows Ralf Hildenbrand’s decision to retire on 1 July 2025, having first joined the company in 1989. 

From left: Ralf Hildenbrand, President of Siegwerk’s Americas business and member of the Group Executive Committee; with his successor Christopher van Laack.

Van Laack joined Siegwerk in 2008 as a trainee in Logistics Management. Dr Nicolas Wiedmann, CEO at Siegwerk, commented: “In his previous roles, van Laack demonstrated strong leadership, strategic thinking, and a deep commitment to Siegwerk’s values. His expertise in business development and operational excellence makes him the perfect successor to drive further growth and innovation in the Americas region and help shape Siegwerk’s future.”

GEW, which makes a range of UV curing systems, has appointed Jonathan Geiger as Sales Manager for Latin America. He will be based in São Paulo, Brazil and cover Central and South America, leaving Amir Dekel, VP of Sales at GEW Inc to deal with customers in Mexico. 

Robert Rae, GEW’s Managing Director for Sales, remarks: “We are delighted to welcome Jonathan, to support and strengthen our global sales team. His in-depth experience and knowledge of all major customers and industry contacts across South America will be a great asset in further building this key market for GEW. Adding to this, Jonathan’s knowledge across a broad range of applications will assist us in promoting the diversity of our product range, beyond our core label and narrow web business.”

Separately, in the US, Michael Bates has joined GMH UV LLC, which was founded by Grieg Heimbuch and acts as GEW’s US distributor. GEW itself has a large parts inventory and an experienced service team in Ohio, leaving GMH to focus on sales and business development. Bates will manage the sheetfed and wide web offset business in Western USA and Mexico, whilst Heimbuch manages the Midwest, Eastern USA and Canada.


Posted

in

, , , ,

by

Syndicate content

You can license the articles from Printing and Manufacturing Journal to reproduce in other publications. I generally charge around £150 per article but I’m open to discussing this for each title, particularly for publishers that want to use multiple stories. I can provide high res versions of images for print publications.

I’m used to working with overseas publishers and am registered for VAT with the UK’s HMRC tax authority but obviously won’t charge VAT to companies outside the UK. You can find further details and a licensing form from this page, or just contact me directly here.

Support this site

If you find the stories here useful then please consider making a donation to help fund Printing and Manufacturing Journal, either as a one-off or a repeat payment. Journalism is only really useful if it’s truly independent and this is the only such news source serving the print/ manufacturing sectors.

However, there are costs involved in travelling to cover events, as well as maintaining this site, not to mention the time that it takes to carry out research, check facts and interview people. So if you value this work, then please help to maintain it and keep it free to read.

Subscribe

Never miss a story – subscribe to Printing and Manufacturing Journal to receive an email notification every time an article is published here. It’s completely free of charge and you can cancel the subscription at any point without any hassle. There’s no need to provide any information other than an email address and subscribers details are not for sale so there’s no risk of any further marketing spam.

Related stories

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *