September and the summer is fading away, taking with it any optimism around the economy, or even any sense that there are any grown-ups in charge of what passes these days for the government.
The modest economic upturn in the first half of the year appears to have run aground and inflation has stayed at 2.2 percent. Consequently the Bank England has left Interest rates untouched at 5 percent this month and hopes are fast fading of rate cuts later this year. In contrast, the US Federal Reserve cut its interest rates this month by half a percent, the first cut in four years as the US economy is starting to pick up. The European Central Bank cut its interest rate in September to 3.5 percent, the second reduction this year. However, the ECB has warned that the Eurozone’s GDP growth is also faltering.
The prime minister, Keir Starmer, and chancellor, Rachel Reeves, who clearly like a challenge, have opted to make the situation harder by constantly warning that things will get worse over the winter, leading most people to assume that the next budget, due at the end of October, will usher in a new round of austerity. This fear has decimated the last remaining shreds of confidence in the economy and put businesses off making new investments. Thus a report from the Recruitment and Employment Confederation found that employers were less confident about taking on new staff, while the British Retail Consortium reported a drop in consumer confidence. Starmer has promised that there is light at the end of the tunnel but for many British people that feels more like the lights of a fast approaching train.
Even Starmer himself is feeling the pinch and has had to tap a passing millionaire, Lord Alli, for suits and new glasses, plus dresses for Mrs Starmer, to the tune of over £100,000. Other Labour MPs accepted clothes, travel and other gifts from their own millionaire friends.
Starmer has said that those with the broadest shoulders must pick up the tab, which much to everyone’s surprise turns out to be pensioners, most of whom will lose their winter fuel allowance, and families with more than two children, who have had their child benefits capped. Reeves, who has also grabbed lots of free handouts, has been unable to explain why the government did not look at alternatives, such as increasing taxes for wealthier people.
The continuing war in Ukraine has been overshadowed by a dramatic escalation of events in the Middle East, with Israel now taking on Hezbollah in Lebanon. Nonetheless, the Ukrainian conflict holds the key to the balance of power in the Middle East because of the exchange of military technology between Russia and Iran and potentially Iran and China. However, all sides are waiting to see who wins the US Presidential election in November.

I’ve written a longer analysis of the month’s geopolitical events, which you can find here. In the meantime, I’ve also covered a number of stories throughout September, with the most widely read being Canon’s new printheads and its move into packaging print. Other popular posts were Epson’s plan to acquire Fiery for $591 million, Xsys acquiring MacDermid Graphics Solutions, Agfa’s Q2 figures and Xaar’s results for its first half of this year.
In other news, Hybrid Software has set up a new business unit, BrandZ, which will provide hosted artwork management and 3D visualization solutions for brands and consumer packaged goods companies. The flagship product for the BrandZ unit is Artflow, a SaaS-based artwork management solution that helps brands, CPGs, and retailers manage their portfolios of complex graphical projects. It’s based on Hybrid Software’s ProofScope software combined with brand-specific tools for things such as briefings and project scheduling. Artflow can be integrated with ERP, CRM, or DAM systems through its core API.
Igor Vandromme, VP/GM of Hybrid Software BrandZ, commented: “Our year-long partnership with TGS has shown that brands and retailers have many unmet needs for artwork management and visualization tools, both for flat artwork and 3D. Being part of Hybrid Software gives us access to a wide software portfolio and technology stack, allowing us to address those needs. For example, our recent collaboration with Diageo for point-of-sale printing of unique custom labels on Johnny Walker bottles was a strong success that will be repeated in the future. With thousands of brands who do not have their own solutions for artwork management, we expect rapid growth in this segment as we add additional sales and support resources around the world.”

Xerox has formed a strategic partnership with Taktiful Software, which uses AI-enabled software to drive the use of digital embellishments. In addition to technological capabilities, the partnership will combine complementary development and business resources to create innovative solutions that integrate seamlessly into existing print hardware, software and workflow infrastructures.
Terry Antinora, senior vice president and head of product and engineering at Xerox, commented: “We are excited to join forces with Taktiful to push the boundaries of what is possible in developing new digital embellishment technology solutions.”
Taktiful has also formed an agreement with Sharp USA. Both Sharp and Xerox are selling digital printers that are based on the Fujifilm PC1120 dry toner printer.
Dantex has committed to using Global Graphics’ SmartDFE for its Pico range of digital UV label presses. Dantex will take advantage of the SmartDFE’s modular approach to build its own customised solution, enabling the company to add extra value and differentiate its product offering.
Ben Danon, CEO of Dantex Group, commented: “We were looking for a DFE and workflow that would take the Pico range to the next level of performance and support our Digital Resolution System technology, and SmartDFE will help us to achieve that. Not only does it expand our offering to our customers, it also enhances our digital platform and helps future-proof workflow automation.”
Danon said that another factor was that Global Graphics is part of the Hybrid Software group, adding: “We already use printhead drive electronics from Meteor Inkjet, another Hybrid Software company, so we now have seamless integration and support across our printing solutions.”
Kongsberg has worked with Enfocus to develop the Kongsberg Integration Bundle that connect Kongsberg’s Production Console with the Enfocus Switch workflow. The bundle consists of three apps. Kongsberg Prepare creates ZIP files containing production-ready PDF and JDF files, along with optional PNG previews, tailored for Kongsberg cutting systems. Kongsberg Submit manages job submission to Kongsberg Hubs, with load balancing capabilities across multiple hubs for optimal production efficiency. Finally, Kongsberg Wait monitors job status until completion, ensuring accurate tracking and seamless workflow continuation.
HP showed off a new add-on slitter for its Indigo 200K at the Printing United show in the USA. This should allow converters to print pressure-sensitive labels, flexible packaging, and shrink-sleeves, slit on-press and then convert the slitted roll on narrow web devices.
The Chinese company Shenzhen Brotech Digital Graphics, better known as Brotech, has introduced a new varnish embellishment module for label applications. It uses five Xaar 2002 printheads and can produce textured varnishes up to 100 microns thick, as well as cold foiling. Ramon Li, General Manager at Brotech, commented: “Xaar’s High Laydown Technology and the exceptional productivity of the Xaar 2002 printhead have enabled us to achieve the unmatched high-build varnish effects that our customers demand.”
Installations
Welch Packaging, which specialises in custom corrugated packaging, has installed a HP PageWide C550 single pass digital corrugated press at its headquarters in in Elkhart, Indiana, USA. The C550 uses HP’s thermal printhead with aqueous inks. It will print to both coated and uncoated sheets.

Welch Packaging, which was founded in 1985, is a family owned business with 24 manufacturing sites across seven states. Brock Welch, COO of Welch Packaging, explained: “We are excited to collaborate with HP, adding a digital printing capability that aligns with our core values: commitment to our customers and the entrepreneurial spirit. With this new press, we can provide high-quality products, at speed, and complement our portfolio of graphics solutions.”
Monster Digital, an American textile printer headquartered in Miami, Florida, is planning to install ten further Kornit Apollo printers in 2025 as part of its continuing transition from screen printing to digital. The company already has seven Apollos and 47 Kornit Atlas Max printers and is also switching to Kornit’s new All-Inclusive Click model.
Scott Valancy, Chief Operating Officer of Monster Digital, commented: “Apollo is changing the way we manage order flow – with the ability to produce digitally at levels of speed and quality the industry has never seen. We are excited with the growth opportunities Apollo opens for us and look forward to providing the ultimate customer experience.”
The Dutch commercial printer ADC Nederland has invested in a Scodix Ultra 2500 SHD digital embellishment machine. It will be installed at ADC Wihabo in Geffen. The company has bases at Barendrecht and ’s-Hertogenbosch, all in the Netherlands. Gert-Jan van Roosmalen CEO of ADC Nederland, said: “The New Ultra 2500 SHD allows us to offer our clients an even broader array of unique, high-impact print products that stand out in the marketplace.”
Appointments
Mirlanda Gecaj, vice president and chief accounting officer at Xerox, will be promoted to chief financial officer on 1 February 2025 when the current CFO, Xavier Heiss, retires after 30 years with the company. Gecaj joined Xerox I 2022, having previously worked for PricewaterhouseCoopers and Element Solutions. Steve Bandrowczak, chief executive officer at Xerox, commented: “She is the ideal leader to step into this crucial role and will continue to help evolve our culture, achieve our financial goals, and drive success for our clients.”

Durst has appointed Chris Schowalter as Global Sales Director Software, where he will lead the development and execution of Durst’s global sales strategy for the software division, while supporting the company’s international sales teams. He has over 20 years of experience in print, primarily in inkjet, in both the United States and Europe.
Schowalter commented: “Durst not only delivers the highest quality printer hardware, but truly provides customers with an end-to-end solution that leverages software to increase productivity and reduce touch points is impressive to say the least. I am honored to join the Durst team and share my 25 years of software and color expertise to help our customers boost productivity and increase process efficiency through advanced software solutions.”
Mark Andy has hired Steve Luedke as Vice President of Advanced Customer Support, where he will lead the new end-to-end support program, MA 360 Support to help customers increase the utilisation and ROI from their equipment. He previously worked at WS Packaging, now part of Multi-Color Corporation.
He commented: “I believe my background will allow me to build strong partnerships with our clients, helping them optimize their businesses with the right tools and solutions from Mark Andy. Our goal is not just to be another vendor but to be a true partner in their success.”
Fujifilm has taken on Gianluca Airaghi as Sales Support for the Wide Format division in Italy. He has over 30 years experience, including working as sales director for Scitex Vision Italy and sales manager of sign and display for HP.
Colm Garvey, European Dealer Manager for Fujifilm Europe, commented: “We are delighted to welcome Gianluca to the Fujifilm family. His extensive industry knowledge, coupled with his proven track record in sales and customer support, makes him an ideal fit for the team. We are confident that Gianluca will play a key role in driving forward our wide format printing business in Italy, helping us to meet the evolving needs of our customers and achieve our ambitious growth targets.”
Upcoming events
I shall be in Japan for a number of events in the second half of October, starting with TokyoPack and the accompanying LabelForum, as well as this year’s Japan Inkjet Technology Forum. If anyone wants to meet with me at these events then do get in touch.


Leave a Reply