New 12K Printbar from Fujifilm

Fujifilm’s Integrated Inkjet Solutions division has announced a new 12K Printbar System that’s essentially a turnkey inkjet system that can be retrofitted to existing equipment. It’s aimed at commercial printing and packaging markets and has been beta tested with a transactional printer. 

Fujifilm Integrated Inkjet Solutions has developed this 12K printbar based on Samba printheads.

The most common use for these printbars is for imprinting – adding variable data to analog pre-printed shells – which often involves fitting the printbar to a converting line. However, they can also be fitted to analogue presses, either to print variable data or to print short run versions and save on some plate changes. There are a number of printbars around but Fujifilm has already had some success with its existing 4300 and 42K systems.

This new 12K printbar has been designed to fit into a very tight space, taking up 53.3cm in the print process direction, which should make it much easier to integrate into existing equipment. It has a 127mm print width. In theory its possible to stitch several of these together for a wider width but Steve Atherton, senior manager of product management and marketing for Fujifilm Integrated Inkjet Solutions, says that customers would be better off working directly with FIIS to configure a wider solution. 

Greg Balch, vice president and general manager of the Fujifilm Integrated Inkjet Solutions group, explained: “We designed the 12K Printbar System to help customers overcome the common challenge of space constraints and to make it easy to integrate with existing processes—all while opening new possibilities for the addition of digital print to existing assets.”

It’s a four-colour system and will work with aqueous dye or pigment inks as well as UV and solvent inks. At its heart, the system is based on the proven Dimatix Samba printhead. The maximum resolution is 1200 dpi at 129.5mpm. The speed rises to 187.5mpm at 600dpi and it can hit 300mpm at 300dpi. It produces a native drop size of 2.4pl and a maximum drop of 13pl. It’s capable of reproducing fonts down to 2pt, or 4pt with a knockout.

Atherton notes: “Fujifilm’s 12K Printbar System incorporates innovations such as ergonomic adjustment features and fluid control automation so that image quality remains consistent over time, minimizing cost and disruption by avoiding the need for ink conditioning additives.”

It uses Fujifilm’s Redijet ink circulation, which should minimise the potential for blocked nozzles. It’s fitted with a liquid cooling system that helps to keep the overall size down. The 12K printbar uses an automated fluid control system of sensors, actuators, and a control algorithm to maintain optimal flow conditions, even if there’s a power outage or if the ink suffers from evaporation and without having to use further additives. The aim has been to reduce the need for operator intervention for such actions as purging, priming, nozzle cleaning, and control adjustments. This is an essential consideration given that these printbars are likely to be fitted to other, more analogue equipment so that an operator won’t necessarily have the skills or the time to run the inkjet system. 

Balch concluded: “Our experience is that customers are seeking a fast, flexible, and reliable solution that can both improve their current inkjet production efficiency and enable the addition of inkjet for new applications.”

It comes with a print controller that deals with print queues, using job tickets and hot folders, as well as the RIP’ing and can synchronise for both simplex and duplex printing. 

The 12K Printbar System is available now and you can find further details from inkjet-integration.fujifilm.com.


…with a little help from my friends

If you value independent journalism then please consider making a donation to help support Printing and Manufacturing Journal. There’s no advertising or other income attached to this site as my aim is to provide impartial and in-depth information to all readers. However, it takes time to carry out interviews and check facts so if this site is of interest to you then please support my work. You can find more information about me here.


Posted

in

, ,

by

Syndicate content

You can license the articles from Printing and Manufacturing Journal to reproduce in other publications. I generally charge around £150 per article but I’m open to discussing this for each title, particularly for publishers that want to use multiple stories. I can provide high res versions of images for print publications.

I’m used to working with overseas publishers and am registered for VAT with the UK’s HMRC tax authority but obviously won’t charge VAT to companies outside the UK. You can find further details and a licensing form from this page, or just contact me directly here.

Support this site

If you find the stories here useful then please consider making a donation to help fund Printing and Manufacturing Journal, either as a one-off or a repeat payment. Journalism is only really useful if it’s truly independent and this is the only such news source serving the print/ manufacturing sectors.

However, there are costs involved in travelling to cover events, as well as maintaining this site, not to mention the time that it takes to carry out research, check facts and interview people. So if you value this work, then please help to maintain it and keep it free to read.

Subscribe

Never miss a story – subscribe to Printing and Manufacturing Journal to receive an email notification every time an article is published here. It’s completely free of charge and you can cancel the subscription at any point without any hassle. There’s no need to provide any information other than an email address and subscribers details are not for sale so there’s no risk of any further marketing spam.

Related stories

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *