Megnajet, which is a subsidiary of Xaar, has introduced a new fluid management system, JetSource HFR, for high volume inkjet printers that use multiple printheads.
Megnajet specialises in developing inkjet fluid management systems, and works directly with press vendors developing new print systems regardless of the printheads in use. This obviously includes inks for print systems, but can also include functional fluids for more industrial applications.
The JetSource units are primarily designed for handling multiple printheads on a single printbar, so each JetSource unit is for a single type of fluid or colour regardless of the number of fluid/ ink paths. The new JetSource HFR builds on the JetSource Core system that was launched in 2023, bur reconfigured to suit a wider print width.
Mike Seal, general manager of Megnajet, explains: “The Core was designed to enable jetting of over 1.5 litres of fluid per minute, such as five Xaar 2002 heads in High Laydown mode or equivalent with 330 ml/min per head, and has five pairs of valves and five Megnajet heaters mounted directly into the main body of the product. This is in order to maintain temperature for such a high jetted output.
“For normal laydown the pump size can be reduced and the output translated into a wider manifold with a single system, thus for traditional inkjet applications only a single JetSource HFR is needed.”
The HFR is available in two configurations, one supporting six fluid paths and the other for eight fluid paths. Each of these fluid paths is a pair of solenoids, valves or ports, with one handling the fluid inlet and one for the outlet. Seal adds: “They are all supplied from the same main tank hence all the same fluid, temperature, pressure and flow rate.”
He says that in practice the system will support up to 16 printheads, though in theory each system could handle more than this. But he notes: “It entirely depends on the flow and pressure requirements of the printhead plus the fluid being used.” He adds: “If you assume a Xaar Nitrox has a flow rate requirement of 75ml/min, a JetSource HFR with a 4.5l pump could have a theoretical maximum of 60 printheads. Realistically speaking, pressure drops and the requirement to ensure a uniform temperature over this many heads becomes a practical limit.”
Seal points out that printbars can be several metres in width for each individual colour channel, noting: “Therefore the requirement for more pairs of valves evenly spaced over this width is certainly something I see expanding. However my view would be that this should be a modular approach and currently eight is a good maximum for this.”
He continues: “Regarding the single pass industry in general I certainly see there being a requirement for more channels. The increased colour offerings plus varnishes and other embellishments continues to grow as more value is delivered through digital. The approach we are taking is still single fluid per system. In the past we have offered combined units in a four-colour system however, it is entirely this expansion that caused us to rethink and create the RackFit product range as four wasn’t enough or too much, so we sliced it down to a single fluid, rack mountable system.”
Naturally the JetSource supports recirculating printheads. Seal explains: “The recirculation pump can be specified up to 4l/min so this will be what is arriving at the manifold as a maximum. There are naturally reductions in the flow from impedance within the pipework and printheads but the flow will be split across the number of printheads evenly. This is purely flow and is normally significantly more than a printhead can eject however the excess maintains the fluid within the system at a consistent temperature and primes the head continuously thus leading to reduced print defects and maintenance.”
The system can handle up to two litres of fluid in total. It will handle most types of inks, as well as more functional fluids. Seal says: “Where more functional or aggressive fluids are used or indeed where there is a degree of uncertainty, we can supply materials compatibility kits to reduce the risk or offer alternative build materials in some cases.”
It can handle fluid viscosity from 10-100cP though this is dependent on other factors such as flow rate and number of heads. Seal adds: “We have two heating solutions within the unit, the first is a larger single heater in the main tank which is augmented by five of our inline heaters splitting the fluid path and heating just before the fluid combines in the manifold and exits the system.”
It’s been designed as a plug and play system that OEMs can implement themselves without requiring further help from Megnajet, and at less cost than developing their own fluid management system. Seal adds: “The control system requires a PC and our supplied software to set-up but can run independently via onboard PLC if required.”
The JetSource unit is usually located close to the printbar, typically less than 0.5m from the printheads, with Seal noting: “The closer the better simply to give a faster and more accurate response from the sensors.”
He adds: “With all our customers we discuss application prior to quotation to ensure we are recommending the best solution and indeed can customise some elements to better fit their requirements such as materials and fittings.”
The Jetsource HFR has completed testing at a beta site and is available now. You can find further details from megnajet.com.


Leave a Reply