Kyocera announces high viscosity head

Kyocera has announced a new printhead, which is still at the prototype stage and doesn’t yet appear to have a name, but which is aimed at the newly emerging market for high viscosity inks and fluids. 

This capability could open up the operating range of inkjet inks, for example, for printing to packaging or textiles without the need for pretreatment, or it could allow for more functional inks, such as for printed circuit boards. Moreover, this capability can go beyond ink to other applications, such as material jetting for additive manufacturing, or for jetting automotive paints. 

These kinds of fluids are extremely challenging, and most current printheads designed to handle low viscosity inks, typically around 3-11 mPa/s, where the fluid flows easily but with more limited functionality. To get around this, most printer manufacturers heat the ink as it enters the printhead, which lowers the viscosity, improving the flowability so that it jets easier. But this is a workaround and is limited by how much heat you can safely have in a printing system, and the operating temperature of the ink itself. 

Kyocera has now adapted one of its existing KJ4-series printheads to address two of the major challenges in jetting more viscous fluids. The most obvious of these is that such fluids have different flow characteristics, which means that the fluids don’t easily flow through the head from the fluid inlet to the nozzle chambers. So Kyocera has had to redesign the fluid channels within the printhead to account for this.

Another requirement is that these fluids require more oomph* to force the fluids out of the nozzles. The KJ4-series heads use a monolithic actuator made from a single, very thin ceramic sheet laced with piezo crystals. This sits above the ink chambers, and applying an electrical signal causes the actuator to change shape, pushing the ink out of the chambers. So for this head Kyocera has had to redesign the actuator to enhance the jetting force. 

The result is a printhead that can jet fluids with viscosity up to 80 mPa/s at room temperature. In practice, heating those fluids will allow the head to handle much higher viscosity fluids. The head has 1,584 nozzles, and an effective print width of 111.69mm. Resolution is limited to 360 x 360dpi, but with a large drop volume of 280 pL.

It’s not currently possible to have high viscosity, with high resolution and high speed; two out of these three, maybe. That also explains why most vendors are talking about fluids for industrial applications such as automotive paint where 360dpi is considered high resolution, rather than inks for graphic arts applications. 

This new head is a prototype and doesn’t even have a finished mount yet as it’s meant for use in a test rig or a robotic arm. This fits with Kyocera’s normal practice of announcing prototypes to attract customers willing to work on further development for their applications. This will allow Kyocera to fine tune its design around real world requirements before finalising a printhead design for commercial release. This process can take several years.  

Kyocera has claimed this as an industry first, which is not really true because Xaar has been addressing the high viscosity printhead market for some years now. What is true is that there is now a growing interest in the possibilities behind high viscosity fluids so we can expect to see more printhead manufacturers developing suitable heads.

In the meantime, you can find more information on Kyocera’s current printhead portfolio and its actuators from kyocera.com.

*not a technical term.


Posted

in

, , , ,

by

Syndicate content

You can license the articles from Printing and Manufacturing Journal to reproduce in other publications. I generally charge around £150 per article but I’m open to discussing this for each title, particularly for publishers that want to use multiple stories. I can provide high res versions of images for print publications.

I’m used to working with overseas publishers and am registered for VAT with the UK’s HMRC tax authority but obviously won’t charge VAT to companies outside the UK. You can find further details and a licensing form from this page, or just contact me directly here.

Support this site

If you find the stories here useful then please consider making a donation to help fund Printing and Manufacturing Journal, either as a one-off or a repeat payment. Journalism is only really useful if it’s truly independent and this is the only such news source serving the print/ manufacturing sectors.

However, there are costs involved in travelling to cover events, as well as maintaining this site, not to mention the time that it takes to carry out research, check facts and interview people. So if you value this work, then please help to maintain it and keep it free to read.

Subscribe

Never miss a story – subscribe to Printing and Manufacturing Journal to receive an email notification every time an article is published here. It’s completely free of charge and you can cancel the subscription at any point without any hassle. There’s no need to provide any information other than an email address and subscribers details are not for sale so there’s no risk of any further marketing spam.

Related stories

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *