Agfa is to introduce new versions of some of its ‘i’ printers that use LED-UV curing rather than conventional mercury lamps. Agfa has opted for air-cooled 16 Watt/cm² UV LED lamps. It’s an obvious move given the benefits of LED curing, namely lower energy costs and more consistent results as the LEDs last far longer.
Thus there’s a new H2500i, a 2.5m hybrid solution for printing rigid and flexible media. It uses six Konica Minolta 1024i printheads, with a drop size of 12 picolitres. These offer CMYK plus light cyan and light magenta. There are two further KM1024i heads, this time with a larger 30 picolitre drop size for printing white ink. It can print at up to 115sqm/hr in draft mode but Production mode is up to 57 sqm/hr.
There’s also a H2050i, essentially a smaller version that’s 2.05m wide and can handle boards up to 3.2m long. It can print at up to 104 sqm/hr or up to 52 sqm/hr in Production mode.
Agfa has also updated its 3.2m roll-fed printer with a new RTR3200i. This has six Konica Minolta printheads and is available with a choice of six colours or four plus two whites. Productivity is up to 127 sqm/hr in draft mode, or 65 sqm/hr in Production mode. It can handle two separate rolls side by side and there’s a mesh option for printing to mesh without liner. There’s even a trolley to load heavier rolls up to 150 Kg.
Naturally, Agfa supplies its Asanti RIP for use with all of these. They all appear to be available to order now, with the H2500i due to be shown at Drupa.

Leave a Reply