French pharmaceuticals company UPSA, which is owned by Bristol-Myers Squibb, has experimented with using additive manufacturing for some processes used in its packaging. UPSA bought a Stratasys Fortus 450mc Production machine and has more than made a return on the investment in the first year.

Mathieu Dumora, project manager in UPSA’s Technical and Infrastructure Department, says that the company estimated the parts that could be 3D printed, adding: “We quickly realized that by using 3D printed parts, we could reduce part weight by 70 percent, which reduces machine wear-and-tear, and has a big impact on productivity and machine longevity.”
Dumora says that the Fortus is used to produce parts for machines used in its manufacturing and packaging line, giving the example of a machine with a heavy cast steel arm that is used to grip and suction open a folding carton, so that blister packs can be inserted. He explains: “These arms are heavy, can become distorted, and sometimes fail and break the machine, but using a 3D printed arm is safer. The ABS-M30i biocompatible 3D printing material can recover if it distorts, but if it breaks, it’s a minimal cost and a short printing time to replace. That’s a huge improvement over a costly steel one. In one year alone, we produced 55 of these parts and made a 95 percent cost reduction on each.”
UPSA has also used the Fortus to build a device to improve the safety of the closure caps for its Efferalgan (paracetamol) for children. The company found that some of the caps sent from its supplier had particles that could have inadvertently posed a risk of contamination to the medication. Dumora says that UPSA developed a system that sucks and blows air to remove any particles, adding: “We test the air suctioned, and even sometimes place particles in caps to test efficacy. Thanks to additive manufacturing, we are able to make this solution ourselves and evolve it through development iterations quickly and cost-effectively.” This has proved so reliable that there’s no longer any need for visual inspections.
UPSA has also been able to print out camera mounts to its manufacturing lines to check on the track and trace coding that’s applied to packaging. Dumora explains: “One of our design engineers used the Fortus 450mc to create the shape he needed, before using it to make 22 units – one for each machine. Prior to this innovation, an assembly of 27 parts was needed; the new design has just two parts, which has seen us enjoy a significant reduction in production time and cost.”
Overall UPSA says that it has realized up to 95 percent cost savings on some processes through using additive manufacturing.

Leave a Reply