Tag: Printheads

  • Xaar launches inkjet printbar

    Xaar is to demonstrate a new inkjet printbar system at next week’s Label Expo show in Brussels. It’s based around Xaar’s 1002 printhead and effectively allows this to be used in a single-pass configuration. It’s suitable for print widths from 70mm up to 560mm, and single or dual configurations with print speeds up to 75m/min…

  • HP adds HDNA printheads to web press

    HP has rebranded its Inkjet Web Presses as HP PageWide Web Presses to underline the new High Definition Nozzle Architecture (HDNA) printheads. Thus there are now two new 42ins/ 106cm inkjet printers, the T480HD and T470HD. The printheads use HP’s dual-drop-weight architecture and have 2,400 nozzles per inch with built-in nozzle redundancy.

  • Xaar enlarges drop size for 1002 printhead

    Xaar has announced a new variant of its 1002 printhead – the 1002 GS12U – which has a larger drop suitable for some UV applications such as high-build spot varnishes and extra-opaque whites onto labels and direct-to-shape packaging.

  • HP improves Inkjet Web Press printhead

    HP has announced a new inkjet printhead for its web presses. The High Definition Nozzle Architecture printhead doubles the native print resolution of its current printheads. Thus the resolution goes up from 10,560 to 21,120 nozzles, or 2400 nozzles per inch.

  • Tested to destruction

    Earlier this year Ricoh set up a European Inkjet Technology Centre at its sprawling base in Telford, UK, to support sales of its inkjet printheads and I went along to check it out.

  • Industrial inkjet announces new print engine

    Industrial Inkjet has launched a range of iS printheads for both mono and colour printing aimed at the label printing sector. Each is fitted with Konica Minolta printheads, including the latest KM1024iM version, providing three times the speed of the popular KM1024 head with the same footprint. 

  • Memjet woos OEMs with new Sirius print engine

    Memjet has introduced a new print engine, which means the bits that go around the print head, such as the ink tanks, the pipes that take the ink to the head, and the pumps and electronics that govern the ink flow. The new print engine, the Sirius-12G, will work with the existing Memjet printhead.

  • Xaar launches new 501 inkjet printhead

    Xaar has launched a new printhead, the 501 GS8, which is aimed directly at the wide format graphics market.

  • Xaar profit warning hits share price

    Xaar issued a trading update on Tuesday 17th, which predicted revenue for 2014 to be £130m, or 3 percent lower than the £134.1 million of adjusted revenue achieved in 2013 (2012: £86.3 million).

  • GIS supports two-colour Kyocera head

    Global Inkjet Systems, which develops software, drivers, firmware and electronics for industrial inkjet printheads, now supports Kyocera’s 2-colour 300dpi KJ4-03T printhead. 

  • Xaar releases new 1002 printhead

    Xaar has announced a new printhead, the 1002 GS6, designed to replace all versions of the 1001. This addresses newer markets, which now require better response and reliability. It’s a mechanically manufactured head, made at Xaar’s Huntingdon factory in the UK. It’s been developed over the last two years and has been shipping since February…

  • GIS develops new electronics for Dimatix heads

    Global Inkjet Systems has developed a new low power regenerative Head Interface Board (HIB) for the Fujifilm Dimatix SG1024 StarFire printheads. GIS specialises in developing software, drivers, firmware and electronics for industrial inkjet printheads. The new GIS HIB-FD-A4D generates the high voltage fire pulses and recovers energy from the printhead after each pulse, using only…